CFMoto 650TR-G State Guest Sprocket: Installation Guide & Performance Review
Looking to unlock the true potential of your CFMoto 650TR-G? A simple yet transformative upgrade lies in the final drive. This guide dives deep into the CFMoto 650TR-G State Guest Sprocket, providing a complete installation walkthrough and a detailed performance review to help you decide if this mod is right for your ride.
What is the State Guest Sprocket and Why Upgrade?
The stock sprocket on your 650TR-G is designed for a balanced mix of acceleration and top speed. Swapping to an aftermarket option, like the popular cfmoto 650tr-g state guest sprocket, allows you to tailor your motorcycle’s character. This specific sprocket typically alters the gear ratio, often for improved low-end torque and sharper acceleration, which is ideal for city riding and spirited canyon runs.
Detailed Installation Guide
Tools & Preparation: Gather a rear stand, socket set, torque wrench, and a new drive chain (recommended). Secure the bike on the stand to lift the rear wheel.
Step-by-Step Process: Remove the rear wheel axle nut and slide out the axle. Carefully detach the old sprocket from the hub. Install the new State Guest sprocket, ensuring it seats perfectly against the hub. Reinstall the wheel, align it correctly, and torque all fasteners to factory specifications. Always adjust the chain slack to the manual’s recommended setting after any sprocket change.
Performance & Riding Experience Review
Post-installation, riders report a noticeable change in the bike’s demeanor. The revised final drive ratio typically delivers stronger pull from a stop and more responsive acceleration through the mid-range. This comes at the expense of some top-speed and potentially higher engine RPMs at highway cruising speeds. The trade-off is often worth it for those seeking a more engaging and agile touring experience.
Frequently Asked Questions (FAQ)
Q: Will this sprocket change affect my speedometer reading?
A: Yes. Changing the rear sprocket size alters the final drive ratio, which will cause your speedometer to read inaccurately unless corrected with a speedohealer or similar device.
Q: Should I change the chain at the same time?
A> It is highly recommended. A new sprocket paired with a worn chain can lead to rapid sprocket wear and potential safety issues.
Ready to Transform Your 650TR-G?
Upgrading your final drive is one of the most cost-effective ways to reshape your motorcycle’s performance. If you crave better acceleration and a more dynamic ride, the State Guest sprocket is a proven upgrade. Check with reputable parts suppliers to source your kit and enjoy a renewed connection with your CFMoto.
